BKTNY - DL2150 METALIZE COATINGS
- MSDS: BKTNY
- Manufacturer: DRUMMOND AMERICAN CORP
- Product Name: DL2150 METALIZE COATINGS
- National Stock Number: 8010-00F016877
Product Identification
Product ID:DL2150 METALIZE COATINGS
MSDS Date:07/01/1988
FSC:8010
NIIN:00F016877
MSDS Number: BKTNY
Responsible Party
DES PLAINES, IL 60018
Emergency Phone: (312) 297-1777
Info Phone: (312) 297-1777
Preparer: RICK LOWE
Cage: 64557
Contractor
Telephone: 708-913-9313
Cage: 64557
Ingredients
AQUEOUS POLYMERIC DISPERSION
Fraction By Weight: 60-65%
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 1-3%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
QUARTZ, SILICON DIOXIDE
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 1-3%
OSHA PEL 10 MG/CUM RESP
ACGIH TLV: 10 MG/CUM DUST
POLYPROPYLENE GLYCOL
CAS: 25322-69-4
RTECS: TR5250000
Fraction By Weight: 1-3%
ORGANIC ACID
Fraction By Weight: 1-3%
BARIUM SULFATE
CAS: 7727-43-7
RTECS: CR0600000
Fraction By Weight: 10-15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN/INHALATION: IRRITATION.
INGESTION: HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN/INHALATION: IRRITATION. INGESTION:
HARMFUL.
Medical Cond Aggravated by Exposure:EYE, SKIN, OR UPPER RESPIRATORY
CONDITIONS.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TOC
Accidental Release
Spill Release Procedures:WIPE UP W/RAG OR USE SOME ABSORBENT MATERIAL
TO SOAK UP SPILL. WASH AREA DOWN W/SOAP & WATER.
Handling
Handling and Storage Precautions:STORE IN DRY, COOL PLACE. KEEP OUT OF
REACH OF CHILDREN. KEEP FROM FREEZING. AVOID CONTACT W/EYES & SKIN.
SMOKE IN SMOKING AREAS ONLY.
Other Precautions:AVOID SPLASHING OF LIQUIDS. STRONG BASE WILL
COAGULATE RESIN.
Exposure Controls
Respiratory Protection:NOT NORMALLY NEEDED IN WELL VENTILATED AREA.
Ventilation:LOCAL EXHAUST: ADEQUATE. MECHANICAL: AS NECESSARY.
Protective Gloves:REQUIRED
Eye Protection:SPLASH-PROOF SAFETY GLASSES
Other Protective Equipment:AS REQUIRED
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING THE WASHROOM.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Pres:24
Vapor Density:>AIR
Spec Gravity:1.3
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE
Appearance and Odor:MILKY LIQUID W/MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASE
Stability Condition to Avoid:FREEZING
Disposal
Waste Disposal Methods:BURY OR INCINERATE RESIDUE IN ACCORDANCE
W/FEDERAL, STATE, LOCAL & EPA GUIDELINES & REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.